home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-06
/
3c503.zip
/
INFO
/
SYSRESRC.TXT
< prev
next >
Wrap
Text File
|
1991-12-18
|
3KB
|
97 lines
3Com Corporation
EtherDisk Diskette for the EtherLink II Family
System Resources
The EtherLink II, and II/TP adapters uses four system resources
using defaults as follows:
- I/O address range 300h
- Interrupt level 3
- DMA channel/Arbitration level 1
- Memory address range DISABLE
The EtherLink II/16, and II/16/TP adapters use five system resources
using defaults as follows:
- I/O base address 300h
- Interrupt level 3
- DMA channel 1
- Memory base address C8000
- Data Transfer Mode 16 bit
These defaults are used in the diagnostics, within NDIS drivers, and in
the case of hardware jumpers, and can be changed. NetWare, on the other hand,
has many optional settings to choose from during installation, and therefore
has no default. Before you install the adapter, make sure that these settings
do not conflict with similar settings on other peripherals.
Listed below are commonly used peripherals and the adapter option settings
they might conflict with. If any of these peripherals are installed in your
computer, check which resources they are using and make sure the EtherLink II
options are not set to use the same resources. Other peripherals, not
mentioned in these lists, might also cause conflicts.
NOTE: The codes in parenthesis following a peripheral name indicates that
the information applies only on those types of computers.
PC -- IBM PC
XT -- IBM PC/XT
AT -- IBM Personal Computer AT
PS/2 -- IBM Personal System/2 models containing the Industry Standard
Architecture (ISA) bus
I/O Base Address
----------------
COM4: - fourth serial port 2E0
GPIB adapter 2E0
Data Acquisition adapter 2E0
Prototype board 300
Interrupt Level
---------------
Reserved (PC) 2
Redirected from level 9 (XT,AT) 2
EGA or VGA video adapter 2
Video (PS/2) 2
ASYNC adapter 3,4
SDLC adapter 3,4
BSC adapter 3,4
Cluster (PC,AT) 3
COM2: - second serial port (XT,AT) 3
PC network adapter 3
COM1: - first serial port (XT,AT,PS/2) 4
Hard disk controller (PC,XT,PS/2) 5
LPT2: - second parallel port (XT,AT) 5
DMA Channel
-----------
SDLC adapter 1
Diskette controller 2
Hard disk controller (PS/2) 3
Memory Base Address
-------------------
Hard disk controller ROM (PC) C8000
Hard disk controller ROM (XT) C8000,CC000
EGA and VGA video ROM C8000,CC000
Expansion RAM D8000,DC000
(%VER System Resources v2.0c)